Insulation Foaming

Graco Reactor H-XP 2 Component Sprayers

Approx Price: Rs 27 Lakh / onwards per Piece 
Minimum Order Quantity: 1 onwards per Piece
Product Details:
  • Brand: GRACO
  • Model: graco reactor H-XP 2
  • Warranty: 3 year for Motor
  • Color: Blue
  • Dynamic Power (watt): 240 v
  • Energy Source: Electric
  • Gross Weight: 120 KG
  • Max Flow (litre/minute): 9 LPM

Since our inception, we are supplying an outstanding quality array of Graco Reactor H-XP3 Component Sprayers. This machinery is mainly used for producing polyurethane or flexible foam, which density is 9-50 kgs/m3. Offered machinery provides the operator with a correct position to operate the machine. Also, the machinery supports the instrument panel and the mixer. Besides, it is an anti-skid surface foam delivering machinery. Apart from everything, this machinery can be purchased by the clients at cost effective rates from us.

  • Easy to adjust and monitor variables
  • Real-time information during foam production
  • Save and secure production environment



  • Density: 9-50 kgs/m3
  • Model: H-XP3
  • Brand: Graco

Insulation Foaming Two Component Sprayers

Approx Price: Rs 23 Lakh / Piece 
Minimum Order Quantity: 1 Piece
Product Details:
  • two Component spray Machine: 2300000
  • Brand: Graco

The Insulation Foaming Component Sprayers that gives you the reliability you expect on the job site. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.

Reactor A-25 Plural Component Proportioner
Maximum Fluid Working Pressure14 Mpa, 138 bar
Maximum Air Supply Pressure0.9 Mpa, 9 bar
Maximum Air Working Pressure550 kPa, 5.5 bar
Pressure Ratio25:1
Air consumption with 02 tips at 1500 psi stall pressure0.8m³/min
Machine Maximum Power with hose9000 Watts
Amperage Requirement (Full Load Peak)*40 amps @ 230 V, 1 Phase; 32 amps @ 230 V, 3 Phase; 18.5 amps @ 380 V, 3 Phase
Maximum Heater Fluid Temperature88°C
Maximum Hose Fluid Temperature82°C
Maximum Ambient Temperature49°C
Maximum Output11.4 kg/min
Output Per Cycle (A and B)0.095 LTR/cycle
Heater Power6000 Watts
Horse Power2790 Watts
Sound Pressure (see NXT air motor manual)70.2 dB(A)
Sound Power (see NXT air motor manual)80.1 dB(A)
Viscosity Range250–1500 centipoise (typical)
Maximum Fluid Inlet Pressure2.1 Mpa, 21 bars or 15% of output pressure
Fluid Inlet/Strainer Filter20 mesh standard
Air inlet Filter Mesh40 Micron
Component B (Resin) Inlet3/4 not(f) swivel
Component A (Isocyanate) Inlet3/4 not(f) swivel
Recirculation/Block Hose Connections(A) side: #5 JIC (m), Resin (B) side: #6 JIC (m)
Maximum Heated Hose Length ***210 ft of 3/8 ID
Weight140.6 kg
Wetted PartsCarbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon
Voltage Requirement Tolerance Range (50/60 Hz)
200–240 V AC Nominal, 1–Phase195–253 V
200–240 V AC Nominal, 3–Phase Delta195–253 V
350–415 V AC Nominal, 3–Phase Wye (200–240 V as Line-to-Neutral)338–457 V
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose.
***210 ft (64 m) of the heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may be used but will have 25% less heat capacity.
Looking for Insulation Foaming ?
Share Us:
© Alpha Marketing, New Delhi
Desktop Site Back to top